3
Figure 2-2
Note:
The location of the adjusting screw may be different due to different models, please refer
to the figures above according to the actual product.
Please be sure to loosen the adjusting screw when adjusting the device position and angle,
tighten the adjusting screw after adjustment.
The continuous rotation toward the same direction for the camera body has to be within 3 circles.
The lower cover can
’t be opened for a long time, besides; it can’t be opened in the humid
environment in case water mist and fog problem may happen to the device.
Step 6
Use screwdriver (in accessories bag) to loosen adjusting screw.
Step 7
Adjust the device in all possible directions, and set its monitoring direction.
Step 8
Use screwdriver to tighten the screws.
