iCraig CMB3215, Owner'S Manual, Page: 13 / 18

To listen the music from the external audio device or non-lockable iPods as followings:
1. Connect the external audio device or iPod by an audio connection cable with 3.5mm
stereo plug on both ends (Cable not included ). Insert one end to the AUX IN jack in
front of the unit. Insert the other end to the phone jack, line-out jack or AUX OUT jack
on the external audio device or iPod.
2. Press the “POWER/FUNC” button on the unit or the button on the remote
control to turn on the unit.
3. Press the “POWER / FUNC” on the unit or the “FUNCTION” button on the remote
control repeatedly until “AUX” appears on the display. Play the music in the
4. Turn the VOLUME knob on the unit or press the VOL+/- button on the remote control
to adjust volume level as desired.
5. When finish listening, press and hold POWER/FUNC” on the unit or press the
button on the remote control to turn the unit to the power off ( standby ) mode.
Connect the external audio device to either AUX IN jack on the unit only. Never connect
two inputs at the same time. Otherwise, both sounds are mixed together and hearing
12
AUX IN:
Note:
connected audio device or iPod as usual.
“
Or connect the external audio device with RCA audio output jack by a RCA connection
cable(cable not included). Insert one end the RCA connection cable to the audio out-
put on external device(such as TV, DVD player...). Insert the other end to the Audio
Jack on the rear of the unit,
from speaker.
Meijer.com