ICPDAS ZT-2510 Series, User Manual

Page: 9 / 17

4
Set up the ZT ‐ 2510 module
4.1 Introduction of configurations
A.
“Pan ID” is the group identity of a ZigBee network, and must be the
same if they are in the same ZigBee network.
(Valid values range from 0x0000 to 0x3FFF)
B.
“Node ID” is the identity of the ZigBee module.
The identity number must be unique if it is in the same ZigBee network as
other ZigBee module. (Valid values range from 0x0001 to 0xFFF7 for a
ZigBee Router, but is fixed to 0x0000 for a ZigBee Coordinator)
C.
“RF Channel” indicates the radio frequency channel, and must be set to
the same channel if the module is in the same ZigBee network as other
ZigBee modules.
Channel 0x00 0x01 …… 0x0F
Frequency(MHz) 2405 2410 …… 2480
※
In addition, the RF channels 0x04, 0x09, 0x0E and 0x0F are recommended
because they are not covered with the frequency of Wi-Fi.
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
802.11b/g Channel (North America)
802.15.4 Channel
2400
MHz
802.11b/g
Channel 1
802.11b/g
Channel 6
802.11b/g
Channel 11
2485
MHz
ICP DAS, ZT ‐ 2510 Series User Manual, Version 1.0
Page 9
Copyright @ 2012 by ICP DAS Co., Ltd. All Rights Reserved.