ICPDAS ET-2268 CR User Manual Download Page 101

Page: 101 / 179

ET-2200 Series Ethernet I/O Modules

-101 -

4.17

SNMP

The "SNMP" page provides the function for ET-2200 to send module information and I/O

information to the SNMP Network Management Software or device to help administrators to

monitor the status of the ET-2200 in real time.

If the Trap function is enabled, ET-2200 can actively send messages to the SNMP manager to keep

track of data when the I/O status of the module changes or restarts. The detailed description is as

follows.

Note:

For DI/DO modules

SNMP function is available for

Firmware v2.3.4

and later. It is not supported for older versions.

For AI/AO modules

SNMP function is available for

Firmware v1.60

and later. It is not supported for older versions.

Note:

ET-2200 currently supports these MIB-II management items such as sysContact, sysLocation,

sysDescr, and sysName.

Summary of Contents for ET-2268 CR








































































































































































Search results

Summary of Contents for ET-2268 CR

Reviews:

ICPDAS ET-2268 CR, User Manual, Page: 101 / 179

Search results

Summary of Contents for ET-2268 CR

Reviews: