ICP POS 566, User Manual, Page: 35 / 54

33
4.3 Advanced CMOS Setup
This Advanced CMOS Setup is designed for tuning the best
performance of the POS-566/566L board. As for normal operation
customers don‘t have to change any default setting. The default
setting is pre-set for most reliable operation.
The following screen will be displayed if you select Advanced
CMOS Setup:
You can change the value of each options by using <PgUp> and
<PgDn> key. The available values are shown on the right screen.
1
st
, 2
nd
, 3
rd
Boot Device
> to define the sequence of boot drives
after the routines check up completes. If the 1
st
Boot Device fails,
the BIOS will attempt to boot from the 2
nd
or the 3
rd
device. The
Optimal and Fail-Safe default settings are C:,A:,CDROM.
Try Other Boot Devices
> the BIOS will try to boot from any
other available device in the system if the 1
st
, 2
nd
and 3
rd
device
fails to boot.
S.M.A.R.T. for Hard Disks > to allow BIOS to use the S ystem
Ma nagement and R eporting T echnologies protocol for reporting
server system information on a network.
Quick Boot > Enabled : this will enable the BIOS to boot quickly
when you turn on your computer. The BIOS will only check the
first 1MB of the system memory.