Control and maintenance
22
iMAT 32VBI-ELV
Installation of the control unit on the service unit:
1.
Check whether or not the service unit (5) goes with
the control unit (1) (model designation and color of
the arresting hook).
2.
Check whether or not the sealing mat (11) and the
contact springs (13) are clean, dry, and free from
impurities.
3.
Introduce the sensor (12) into the sensor tube plate
(14).
4.
Hang the hook (15) of the control unit (1) in the
sensor tube plate (14).
5.
Press the control unit (1) against the service unit
(5) and snap into place.
Start subsequent to maintenance measures:
Always carry out prior to the start-up:
• Leak test of the screwed connector
• Check of the electrical connections
• Check of the correct engagement of the control unit
Pos : 66 /---- Seitenumbr uch ---- @ 0\mod_1157028099015_0.doc x @ 15320 @ @ 1
Summary of Contents for iMAT 32VBI-ELV
Page 26: ...26 iMAT 32VBI ELV...
Page 27: ...iMAT 32VBI ELV 27...
