64-bit/133MHz PCI-X
-
Serial ATA II
Hardware RAID Controller
l
RAID 0, 1, 1E, 5, 5EE, 6, 10, 50, 60 and JBOD
(single disks)
l
Auto Hot Plug wi th SES Enclosure Management
l
Global or Dedicated Hot Spare (Hot Fix) drives
l
Hardware RAID is totally independent from the
host and operating system
l
Integrated acoustic alarm
Versatile Connectivity Capabilities
l
Supports four or eight internal independent
SATA II ports, depending on the controller type
l
Connection of one hard drive per port (point-to-
point configuration)
l
Up to 300MB/sec bandwidth per port
l
Supports Native Command Queuing (NCQ)
PCI-X Bus Specification
l
64-Bit/133MHz PCI-X bus interface with up to
1064MB/sec. bandwidth
l
Backwards compatible with PCI-X/100MHz,
PCI-X/66MHz and PCI 64-Bit/66MHz interfaces
l
Needs one 3,3 Volt PCI/PCI-X slot
New RAID Controller Architecture, Processor-
and Memory Technology
l
Integrated ROC (RAID-on-Chip) ASIC, 200MHz,
Integrated XOR engine for optimized parity
computation
l
Completely offloading the host CPU
l
Supported DDF (Disk Drive Format) is the Adaptec*
Metadata Format (AMF) that allows interchanging
of RAID arrays between the new ICP controllers
(not compatible with former GDT controllers)
l
Supports 64-bit AMD*64 and Intel* EM64T
systems
l
Onboard 256MB/64-Bit ECC DDR memory ,
intelligent multi-level cache algorithm
Intelligent Battery Backup Unit (optional)
l
RAID cache holds cached data and stores it even
in the case of power failure, at system/controller
restart all data in cache will be written to the
hard drives
l
Lithium ion battery with type./min 72-hours cache
memory protection
l
One-year warranty on the battery with appropriate
handling (see manual)
Operating System Support
l
Windows* XP; Windows* 2000 Server, Advanced
Server and Professional; Windows* Server 2003,
Standard and Enterprise; Windows* XP
Professional x64 Edition; Windows* 2003 x64
Edition
l
Linux: Red Hat* Advanced Server 3.0, SuSE* 9.1,
SuSE* Linux Enterprise Server 9
l
Novell* NetWare* 6.5
l
Additional operating systems projected
High Configuration Flexibility
l
ROM -resident setup fur configuration und
maintenance (CTRL+<A>)
l
Flexible capacity setting
l
Full capacity utilization of mixed size drives
l
RAID arrays exceeding 2 TB
are supported
l
Simultaneous operation of several disk arrays,
multiple arrays even on the same disk
l
Online capacity expansion (with scheduling)
l
Enhanced Online RAID Level Migration
(1->0<->10<->5<->5EE, 1->5<->6)
l
Complete disk array migration
l
The RAID Arrays from other ICP controllers may
easily be migrated without reconfiguration -
Array Roaming (Not possible with ICP RAID
controllers of the GDT series)
Integrated RAID Software
ICP Storage Manager (ISM)
l
ICP RAID Configuration Utility – installation
and monitoring software, available for Windows*,
Linux* and Netware* operating systems, remote
access, connection to the common management
of the Adaptec* products
l
Support for S.M.A.R.T exceptions notification
l
Software updates based on Flash-RAM technology
incl uding recovery function. Latest firmware,
drivers and tools available at
www.icp-vortex.com
Delivery Contents
l
ICP Disk Array Controller with integrated
256MB ECC DDR memory
l
Quick Installation Guide
l
CD-ROM with tools, drivers and
comprehensive manual
l
Three-year warranty for controllers
l
Lifelong ICP hotline support
ICP vortex Computersysteme GmbH
l
Konrad-Zuse-Str. 9
l
D-74172 Neckarsulm
l
Germany
ICP Support Hotline
l
T el: +49-7132-9620-900
l
E-Mail: [email protected]
l
http://www.icp-vortex.com
E
X
c
e
l
l
e
n
c
e
i
n
C
o
n
t
r
o
l
l
e
r
s
Copyright 200
6
ICP vortex Computersysteme GmbH, ICP „Intelligent Computer Peripherals“ is a registered trademark.
*Other names and brands m
ay be claimed as the property of others.
Technical changes reserved.
Product pictures may differ from actual p
rodu
ct
s Printed in Germany.