&KDSWHU&4XLFN6HWXS
The main menu gives you the following options. As mentioned before, we have to go
through levels 1 to 4 to install the SCSI hard disk (with almost nothing to do on levels 3 and
4).
6WHS&RQILJXUH3K\VLFDO'HYLFHV
Now activate the menu
Configure Physical Devices
(level 1). A list appears showing all hard
disks found on the ICP Controller’s SCSI channels. If you have a ICP Controller with a differ-
ent number of SCSI channels, the existing SCSI channels are displayed. Note: This screen
will always report all devices that are found to be connected to SCSI-cables, even though
GDTSETUP only allows you to work on
Direct Access Devices
(and therefore not on tape drives,
DATs, CD ROMs etc.).
The screen shows you:
the channel to which a SCSI device is connected
which SCSI-ID the drive has (the entry SCSI I/O Processor stands for the corresponding
SCSI channel of the ICP Controller. It has the default setting ID 7, as explained in chapter
B)
the initialization status
the SCSI names of the drives
the Read-Write-Status. [RW] = Read + Write
the gross capacity
membership in a Logical, Array or Host Drive
Use the cursor keys
n
and
p
to select the drive you wish to initialize. We take the first drive
of channel A in the list. With this drive selected, press <ENTER>.
/HYHO
/HYHO
/HYHO
/HYHO
