16
Switch Between Local / Remote Computer
(Hotkey Available only on Receiver Console)
On the Receiver Console, one can switch between the 1
st
computer (connected across
150M via CATx cable) and the 2
nd
computer (connected directly to the Receiver) by
the following hotkey command:
Hotkey sequence = [CAPS]* + [CAPS] * + (y)** (y) =
←
,
→
(y) = ← , Local (2nd computer)
(y) = →, Remtoe (1st Computer)
FCC/CE Standards
FCC Statement :
This equipment has been tested and found to comply with the
regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with this Quick Installation Guide, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case, the user will be required to correct the
interference at his/her own expense.
CE Statement
: This is a Class B product in a domestic environment, this product may
cause radio interference, in which case the user may be required to take adequate
measures.
Switch Between Local/Remote Computer
Optimize the Video
