12
2.7 Clear CMOS Setup (JP1)
If want to clear the CMOS Setup(for example forgot the
password you should clear the setup and then set the password
again.), you should close the JP1 about 3 seconds, then open it
again. Set back to normal operation mode, open JP1.
•
JP1 : Clear CMOS Setup (Reserve Function)
JP1
DESCRIPTION
OPEN Normal Operation
CLOSE
Clear CMOS Setup
2.8 PS/2 Mouse IRQ12 Setting (JP5)
While operating, the on board PS/2 mouse will use IRQ12.
•
JP5 : IRQ12 Enable/Disable Setting
JP5
DESCRIPTION
CLOSE IRQ12 Enable for PS/2 Mouse Operating
OPEN
PS/2 Mouse Disable. IRQ12 release to bus
2.9 CPU Voltage Setting (JP8, JP13)
The CPU voltage setting is for the factory test only. The default
setting is open.
StockCheck.com
Downloaded from StockCheck.com
