25
4.5 Power Management Setup
Power Management/APM >
to enable or disable the Advanced
Power Management feature.
Green PC Monitor Power State >
to specify the power state of
the monitor after the specified period of display-idle has ended.
Video Power Down Mode >
to specify the power state of the
VESA VGA video subsystem after the specified period of
display-idle has ended.
Hard Disk Power Down Mode >
to specify the power state of
the hard disk after the specified period of hard drive-idle has
ended.
Standby Time Out (Minute) >
to specify the length of the
system-idle period while the system is in full power on state.
After this period of time has ended, the system will go into
Standby state.
Suspend Time Out (Minute) >
to specify the length of the
system-idle period while the system is in Standby state. After
this period of time has ended, the system will go into Suspend
state.
Throttle Slow Clock Ratio >
to specify the speed of system
clock under power saving state. The figure is a ratio between
power conserving and normal state CPU clock.
Modem Use IO Port >
to assign a port for modem.
Modem Use IRQ >
to assign an IRQ for modem
Display Activity >
to specify if BIOS has to monitor display
activity or not.
Summary of Contents for ROCKY-P258BX
Page 2: ......
