manualshive.com logo in svg

ICP Electronics ROCKY-3786EV, User Manual

Share
Download
ICP Electronics ROCKY-3786EV User Manual Download Page 45

 

45 

IDE  Primary/Secondary Master/Slave PIO 
The four IDE PIO (Programmed Input/Output) fields let the user 

set a PIO mode (0-4) for each of the four IDE devices that the 

onboard IDE interface supports. Modes 0 through 4 provide 

successively increased performance. In Auto mode, the system 

automatically determines the best mode for each device. 
The Choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4. 

IDE Primary/Secondary Master/Slave UDMA 
Ultra DMA-33/66 implementation is possible only if the user’s 

IDE hard drive supports it and the operating environment 

includes a DMA driver (Windows 95 OSR2 or a third-party IDE 

bus master driver). If the user’s hard drive and the user’s 

system software both support Ultra DMA-33/66, select Auto to 

enable BIOS support.  
The Choice: Auto, Disabled. 

USB Controller 
Select  Enabled if the user’s system contains a Universal Serial 

Bus (USB) controller and the user have USB peripherals.  
The Choice: Enabled, Disabled. 

USB Keyboard Support 
Select  Enabled if the user’s system contains a Universal Serial 

Bus (USB) controller and the user have a USB keyboard.  
The Choice: Enabled, Disabled. 

Onboard Audio Device  
This item allows the user to decide to enable/disable the 

CMIDER CMI8738LX chipset family to support 6CH DAC for AC-3 

5.1 channel purpose. 
The Choice: Enabled, Disabled. 

Summary of Contents for ROCKY-3786EV






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands