ICP Electronics ROCKY-3732EVS, Manual

Page: 33 / 64

33
Use the legend keys to navigate through this menu and exit to
the main menu. Use Table 3 to configure the hard disk.
Item Options Description
IDE HDD Auto-
detection
Press Enter Press Enter to auto-detect the
HDD on this channel. If detection
is successful, it fills the remaining
fields on this menu.
IDE
Primary Master None
Auto
Manual Selecting ‘manual’ lets you set
the remaining fields on this
screen. Selects the type of fixed
disk. "User Type" will let you
select the number of cylinders,
heads, etc. Note:
PRECOMP=65535 means
NONE !
Capacity Auto Display
your disk drive
size Disk drive capacity
(Approximated). Note that this
size is usually slightly greater
than the size of a formatted disk
given by a disk checking
program.
Access Mode CHS
LBA
Large
Auto Choose the access mode for this
hard disk
The following options are selectable only if the ‘IDE Primary Master’
item is set to ‘Manual’
Cylinder
Min = 0
Max = 65535 Set the number of cylinders for
this hard disk.
Head Min = 0
Max = 255 Set the number of read/write
heads
Precomp Min = 0
Max = 65535
**** Warning : Setting a value of
65535 means no hard disk
Landing zone Min = 0
Max = 65535 ****
Sector Min = 0
Max = 255 Number of sectors per track
Table 3 Hard disk selections