manualshive.com logo in svg

ICP Electronics IEI PCISA-6755-RS Series, User Manual

Share
Download
ICP Electronics IEI PCISA-6755-RS Series User Manual Download Page 39

 

 These options enable shadowing of the contents of the ROM area named 
in the option title. The settings are Enable Disable, Cached. ISA adapter 
cards will be allocated to PCI  adapter cards.800,16k Shadow 

4.8 

Advanced Chipset Setup 

This section allows you to configure the system based on the 
specific features of the installed chipset.  This chipset 
manages bus speeds and access to system memory 
resources, such as DRAM and the external cache.  It also 
coordinates communications between the conventional ISA 
bus and the PCI bus.  It must be stated that these items 
should never need to be altered.  The default settings have 
been chosen because they provide the best operating 
conditions for your system.

 

 

DRAM  Frequency 

This setting decided by Memory frequency. 

SDRAM CAS#  Latency 

This setting decided by Memory CAS latency 

AGP Aperture Size 

Select the size of AGP aperture. The aperture is a portion of the PCI 
Memory address space. Host cycles that hit the aperture range are 
 forwarded to the AGP without any translation 

 

39

Summary of Contents for IEI PCISA-6755-RS Series

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands