Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
E-mail:
3
Mode, Button function and LED description
WLS-T02 has built-in two modes, "Running mode" and "Setting mode".
The functions of these two modes are described as follows:
1. Running mode: This mode is used to transmit location package
every 3 seconds in the background. In this mode, the user can
press the button to enter the setting mode. When the pre-job as
above section is completed, WLS-T02 will default to the "Running
Mode".
2. Setting mode: This mode is used to transmit Node ID forcefully to
WLS-CFG, or enter to “long time sleep status”. If the user does not
press any button for 8 seconds, the module will automatically save
and directly enable the setting value, and then leave the "Setting
Mode". Then, if WLS-T02 doesn’t enter “long time sleep status”, it
will return to the "Running Mode".
In the above two modes, pressing different buttons will correspond to
different functions, and various functions will be indicated by the different
blinking frequency of LED. Please refer to Fig2, Fig3, Table1 and Table2:
Fig2. State flow chart
Start
Running mode
Setting mode
▲
+
▼
Be
pressed 3
seconds?
Yes
No
Pressing
any button
inside 8
seconds?
▼
Be
pressed 3
seconds?
Long time sleeping status
Saving setting
Waiting
▲
+
▼
be
pressed 3 seconds to
wake up
No
No
Yes
Yes
Wake up
Sleeping
