Version 1.0.0
Page
4
Copyright © 2016 by ICP DAS Co., Ltd. All Rights Reserved.
There are 3 LEDs in the WLS-R01, and they are PWR, RF_Tx and
RF_Rx. The description of 3 LEDs as below:
1.
PWR
：
Power LED, red, it will steady lit after power-on. If the LED don’t
steady lit, it means the power have problem.
2.
RF_Tx
：
RF Transmitting LED, green, it will blink once when WLS-R01
transmits a wireless package of 400MHz. If 400M Node ID is set to
0x00, the LED of RF_Tx will steady lit to caution, and WLS-R01
doesn’t transmit wireless packages of location, the user need to
switch to other Node ID.
3.
RF_Rx
：
RF Receiving LED, green, it will blink once when WLS-R01
receives a wireless package of 2.4GHz.
