ICP DAS WISE User Manual
http://wise.icpdas.com
249
shown as follow:
Figure 10-52
：
MQTT Broker Function action setting page
Follow the steps below:
i
Select the specific Broker from the dropdown list of the
“Broker” field.
ii
Specify the Broker Function status to be “Disable” or “Enable”
from the dropdown list of the “Status” field. When the Action
being executed, the Broker Function status will be changed to
specified status.
iii
Click “OK” button to confirm the settings and return to the Rule
settings page.
10.2.7.2 Publish Message
You can publish a MQTT Topic to the Broker when executing a
THEN/ELSE Action statement; the editing page is shown as below:
Figure 10-53
：
MQTT Publish Message action setting page
Follow the steps below:
i
Select a pre-set MQTT Publish Topic message from the
dropdown list of the “Broker” and “Message” fields. The
MQTT Publish Topic message will be displayed for you to
verify if this is the MQTT Publish Topic message you are going
to send to.
ii
Click “OK” button to confirm the settings and return to the Rule