WF-2572 Series
, Ethernet to Wi-Fi Bridge (V1.10, 2019/08/30) 22
Step3.
Internet connection test
1.
The Windows( ) + R will show you the “RUN” box where you can type commands
to either pull up a program. The command line windows will be opening after typing
“cmd” at the “RUN” box.
2.
Please execute following command on the command line window.
Command 1: ping 192.168.255.10
Command 2: ping 192.168.255.11
3.
As shown in Figure 4-7, the internet access is working fine that it should show a
similar reaction as following figures.
Figure 4-7. Ping Success
4.4.3 Query device MAC by using WF-2572 utility
According to the type of device, it can be divided into different query methods. When the
device is computer, it can use the command line windows to query the MAC address. If the
device is PLC or other Ethernet devices, it can use the WF-2572 utility to query the MAC
address.
1.
Device: Computer
Setp1.
The Windows( ) + R will show you the “RUN” box where you can type
commands to either pull up a program. The command line windows will be opening after
typing “cmd” at the “RUN” box.
Step2.
Please execute “ipconfig/all” command on the command line window. The
computer’s MAC will show at the command line windows. The result has shown in Figure
