WF-2055 Quick Start RevB1.0 2016/09
4/8
Installation
Before use, associated hardware configuration, the steps described as
follows
：
Step 1: Checking the WF-2000 series firmware operation mode
It needs to set the DIP switch to the "OP" position (operation mode), as
resetting the power, WF-2000 series will be in the operation mode.
Step 2: Serial port connection
WF-2000 series supports RS-232 serial communication. The circuit
configuration is as shown in Figure 2.
If you do not need parameter setting, this step can be omitted.
Step 3: Power connection
Connect the power supply to WF-2000 series' power terminator, as shown in
Figure 2.
WF-2000 series connection setting
WF-2000 Series Connection Configuration
Figure 5
:
Connection Configuration
