tWF-DA1PD2R1 User’s Manual
tWF-DA1PD2R1
User’s Manual (Rev1.0, APR./2019) ------------- 15
3.1.2.4
Calibration
Checked the “Cal.” checkbox, use Track Bar & fine tune button adjust the DA output
voltage, make Vout-AGND pin as near as 10.00V, clicked the button “DAC 10V Cal.
Set“ to save the setting, then unclick the “Cal.” checkbox for normal use.
(Device have been calibration when shipping)
3.1.2.5
Status Bar
Show the F/W Version, Device’s MAC address and Device’s IP address.
3.1.2.6
ICON
ICON
function
Setup
Open the Setup page (Android versions Setup
function under the
icon)
Find
Controller
Red Led blinking, use to find the connected
Controller
Refresh
Refresh status
Web operating please use
F5 or Refresh
Menu
Only Android Device,
Include setup, Function
config, FW Version & About.
DI Counter
Show the DI trigger counter page
Function
Mode
Open the Standalone Function config page
Table 3-1
:
icon Indicator
