tM-AD8C 8-channel Current Analog Input Module
- QuickStart (Jun/2016)
ICP DAS USA, Inc.
| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
3. Block/ Wiring Diagram
Use 26-12 AWG wire for signal connections.
Strip the wire to a length of 7±0.5mm.
Use a crimp terminal for wiring.
Avoid high-voltage cables and power equipment as much as possible.
For RS-485 communication, use insulated and twisted pair 24 AWG wire, e.g.
Belden 9841.
4. Default Settings
Default settings for the tM AD modules are as follows:
。
Protocol: Modbus RTU
。
Module Address: 01
。
Analog Input Type: type code 08, -10V to 10V
。
Baud Rate: 9600 bps
