SMS-531 User’s Manual v1.1
- 18/60 -
4.4 Parameters
The parameters would be shown in the right of the windows if click the tree field
in the left side of the GT-531 Series Utility. Press the parameters’ “Value” filed can
change these parameters as the following figure.
4.4.1 System
There are 6 items in the system field below.
A.
Protocol:
The communication protocol of the SMS-531.The current protocol is Modbus
RTU. It can not be changed.
B.
Module Address:
To show or set the Modbus ID of the SMS-531.
C.
Debug Message:
Disabling or enabling the debug messages from COM1.
