ICP DAS PMC/PMD Series User Manual
83
Figure7-10 :
Add the Modbus RTU Power Meter manually
7.1.3
Add Modbus TCP Power Meter Manually
PMC/PMD allows connection to Modbus TCP Power Meters via
Ethernet, the user could add the Modbus TCP Power meter to the list
manually; the steps are as below:
i
No: The Number will be the order that the power data of the
Modbus TCP power meter being stored in the PMC/PMD Modbus
Table. The range is 1~16.
ii
Network: Set up the settings of IP, Port and NetID appropriately as
required. Please make sure the network setting is the same as the
settings of the module, if the setting is not accurate, the connection
for PMC/PMD to the power meter will be failed.
Figure7-11 :
Add Modbus TCP Power Meter
iii
Select the Power meter model (Figure 7-12):
Summary of Contents for PMC series
Page 1: ...ICP DAS PMC PMD Power Meter Concentrator Series User Manual Version 3 1 8...
Page 51: ...ICP DAS PMC PMD Series User Manual 38 Figure5 32 Energy Usage Breakdown by Circuit Group Chart...
Page 72: ...ICP DAS PMC PMD Series User Manual 59 Figure6 11 Security setting interface of VPN function...
Page 165: ...ICP DAS PMC PMD Series User Manual 152 The Import of MQTT Topic...
