ICP DAS USA PMC-523 Series User Manual Download

Page: 31 / 347

ICP DAS PMC-523x/PMC-224x/PMD Series User Manual

Main Page

On the Main Page, 10 information display options are as follow: Power Meter

Information, Power Data Information, Realtime Chart, Historical Chart, Historical

Data Report, Historical Electricity Analysis, PUE Information, I/O Information, Event

Log, Polling Time Information, Modbus Table Information and UID information,

shown as follow:

Figure5-1 :

Information display options on Main Page

5.1

Power Meter Information

Power Meter Information page displays detailed power data information

including: Power Meter Information Overview and Power Meter Statistics

Information Overview.

5.1.1

Power Meter Information Overview

After getting into this page, the system will display real-time power

information of the selected power meter. To display desired power

meter data information, select the power meter from the dropdown list

Summary of Contents for PMC-523 Series




























































































































































































































































































































































Search results

Summary of Contents for PMC-523 Series

Reviews:

Related manuals for PMC-523 Series

Brands by name

Popular brands

ICP DAS USA PMC-523 Series, User Manual

Search results

Summary of Contents for PMC-523 Series

Reviews:

Related manuals for PMC-523 Series

Brands by name

Popular brands