ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
224
Follow the steps below:
i
Select the specific Broker from the dropdown list of the
“Broker” field.
ii
Specify the Broker Function status to be “Disable” or “Enable”
from the dropdown list of the “Status” field. When the Action
being executed, the Broker Function status will be changed to
specified status.
iii
Click “OK” button to confirm the settings and return to the Rule
settings page.
11.2.6.2
Publish Message
You can publish a MQTT Topic to the Broker when executing a
THEN/ELSE Action statement; the editing page is shown as
below:
Figure11-38 :
Publish Message action setting page
Follow the steps below:
i
Select a pre-set MQTT Publish Topic message from the
dropdown list of the “Broker” and “Message” fields. The
MQTT Publish Topic message will be displayed for you to
verify if this is the MQTT Publish Topic message you are going
to send to.
ii
Click “OK” button to confirm the settings and return to the Rule
settings page.
11.2.6.3
Reset Topic
You can reset the saved content of the subscribe topic when
executing a THEN/ELSE Action statement; the editing page is
shown as below:
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
