PISO-P16R16U and PEX-P8R8i/P16R16i Quick Start Guide
ICP DAS CO., LTD.
3
WebSite: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com
Please make sure jumper is kept in default setting before self-test.
Input Signal Type Jumper
For more detailed jumper and SW1 information, please refer to section 2.2
Jumper and Card ID Switch Settings of the user manual.
(
CD:\NAPDOS\PCI\PISO-DIO\manual\)
Step 1:
Shut down and power off your computer.
Step 2: Remove the cover from the computer.
Step 3: Select an unused PCI/PCI Express slot.
Step 4: Carefully insert your I/O card into the PCI/PCI Express slot.
Step 5: Replace the PC cover.
Step 6: Power on the computer.
After powering-on the computer, please finish the Plug&Play steps according
to the prompted messages.
Installing Hardware on PC
JP1~JP8 and JP9~JP16
Jumper
Channel
Jumper
Channel
JP1
DI 0
JP9
DI 8
JP2
DI 1
JP10
DI 9
JP3
DI 2
JP11
DI 10
JP4
DI 3
JP12
DI 11
JP5
DI 4
JP13
DI 12
JP6
DI 5
JP14
DI 13
JP7
DI 6
JP15
DI 14
JP8
DI 7
JP16
DI 15
Without Filter for
DC Signal
(Default)
Without AC Filter for
AC Signal