PIO-821 Series Card
45 kS/s 12-bit, 16-ch A/D, 1-ch D/A Multi-function DAQ Board
User Manual, Ver. 2.0, Mar. 2015, PMH-019-20, Page: 42
2. PIO/PISO identification information:
wSubVendor:
subVendor ID of this board
wSubDevice:
subDevice ID of this board
wSubAux:
subAux ID of this board
3. PC’s physical slot information:
wSlotBus:
hardware slot ID1 in this PC’s slot position
wSlotDevice:
hardware slot ID2 in this PC’s slot position
The PIO_PISO.EXE utility will detect and show all PIO/PISO cards installed in this PC. Refer to
Sec.
7.1.1
for more information.
7.1.1
PIO_PISO Utility
The PIO_PISO.EXE is valid for all PIO/PISO cards.
This program shows all PCI hardware ID regarding
the PIO and PISO series DAQ cards. It is useful to test if the card Plug & Play successfully when the
computer bootup. If the PIO or PISO series card does not shown in the screen correctly, please try to
use another PCI slot and try again.
The user can execute the PIO_PISO.EXE to get the following information:
List all PIO/PISO cards installed in this PC
List all resources allocated to every PIO/PISO cards
List the wSlotBus and wSlotDevice for specified PIO/PISO card identification. (refer to
Sec. 7.2
for more information about the assignment of I/O Address)
