PEX-P64/PISO-P64U Series Quick Start Guide
ICP DAS CO., LTD.
5
WebSite: http:// www.icpdas.com.tw E-Mail: service@icpdas.com , service.icpdas@gmail.com
Prepare for device:
DN-37 (optional) wiring terminal board.
Exterior power supply device. For example: DP-665 (optional)
Self-test wiring as follows:
1.
Use the DN-37 to connect the CON1 on board.
2.
Keep set the J1 jumper to
External Power (Page 3)
.
PEX-P64 and PISO-P64U External Power Wiring:
3.
Power Supply (+5 V)
connect to
ECOM0 (Pin18)
.
Power Supply GND
connect to
IGND0 (Pin1)
.
IGND0 (Pin1)
connect to
DI7 (Pin9)
.
PEX-P64-24V/PISO-P64U-24V External Power Wiring:
3.
Power Supply (+24 V)
connect to
ECOM0 (Pin18)
.
Power Supply GND
connect to
IGND0 (Pin1)
.
IGND0 (Pin1)
connect to
DI7 (Pin9)
.
Self-Test
The PEX-P64/PISO-P64U suggests input voltage range as follow:
Logic high: +5 ~ +15 V (Max. 24 V)
; Logic Low: 0 ~ 1V.
(Higher voltage over the limitation will cause the hardware damage.)
The PEX-P64-24V/PISO-P64U-24V suggests input voltage range as
follow:
Logic high: +20 ~ +28 V (Max. 30 V)
; Logic Low: 0 ~ 1V.
(Higher voltage over the limitation will cause the hardware damage.)