Firmware Update via 7188XW.exe (Ver. 1.0/Sep. 2018)
Page:
6
Step 9: Connect both the PDS-220Fx module and your computer to the same sub
network or the same Ethernet Switch.
Please refer to
“Chapter 1- Connecting the Power and Host PC”
in the PDS-200Fx Quick Start Guide.
Download the Quick Start Guide.
Step 10: Install the
VxComm Utility
on
your Host PC, and then run the Utility
to search for any PDS-220Fx module
connected to the nework.
Step 11: Configure the correct network settings for the required PDS-700 module.
Please refer to
“Chapter 3-Configuring Network Settings”
in the PDS-220Fx Quick Start Guide. If the IP
address settings do not work correctly, refer to
.
