High-speed Multifunction Boards
User Manual, Ver. 1.0, Jan 2020, PMH-032-10 Page 26
3
Hardware Installation
Note:
It is recommended that the driver is installed before installing the hardware as the computer may
need to be restarted once the driver is installed in certain operating systems, such as Windows 2000
or Windows XP, etc. Installing the driver first helps reduce the time required for installation and
restarting the computer.
To install the PCIe-LM4 Series cards, follow the procedure described below:
Step 1: Install the driver for the PCIe-LM4 board on your computer.
For detailed information about
installing the driver, refer to
Step 2: Configure the Card ID using the DIP Switch (SW1).
For detailed information about the Card ID, refer to