PCI-82x Series Cards
Multifunction Boards
User Manual, Ver. 1.5, Jan. 2017, PMH-024-15, Page: 26
4
Software Installation
This chapter provides a detailed description of the process for installing the driver for the
PCI-822/826 Series card as well as how to verify whether the PCI-822/826 Series card was properly
installed. PCI-822/826 Series cards can be used on DOS, Linux and Windows 2000 and 32-/64-bit
version of Windows XP/2003/7/8 based systems, and the drivers are fully Plug and Play compliant for
easy installation.
4.1
Obtaining the Driver Installation Package
The driver installation package for PCI-822/826 Series cards can be found on the companion CD-ROM,
or can be obtained from the ICP DAS FTP web site. Install the appropriate driver for the operating
system. The location and website addresses for the installation package are indicated below.
UniDAQ Driver/SDK
Operating
System
Windows 2000
、
32/64-bit Windows XP
、
32/64-bit Windows 2003
、
32/64-bit Windows Vista
、
32/64-bit Windows 7
、
32/64-bit Windows 2008
、
32/64-bit Windows 8 and 32/64-bit Windows 10
Driver Name
UniDAQ Driver/SDK (unidaq_win_setup_xxxx.exe)
CD-ROM
CD:\\ NAPDOS\PCI\UniDAQ\DLL\Driver\
Website
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
Installation
Procedure
Please follow the following steps to setup software:
Step 1:
Double click the
UniDAQ_Win_Steupxxx.exe
to setup it.
Step 2:
When the Setup Wizard screen is displayed, click the
Next>
button.
Step 3:
When the Information screen is displayed, click the
Next>
button.
