Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved.
∗
E-mail: [email protected] - 24 -
STEP 7:
Go to
GENERAL SETTINGS
and select
NETWORK SETTINGS
tab, enter valid IP/Subnet mask and
Gateway addresses on the network for your MDCL module. Make sure that the IP address you pick
is not currently in use by another device on the network.
Field
Description
Default Setting
Type
IP Address
Enter a valid IP address for the MDCL-705i
192.168.255.1
Required
Subnet Mask
Enter the Subnet Mask address for the module
255.255.0.0
Required
Default Gateway
Enter the Gateway address for the module
192.168.0.1
Required
DNS Server 1
Enter the primary DNS server address (IPv4)
If a domain name is set for the NTP server or the
FTP server, at least one DNS server should be
specified for host name lookups.
-
Optional
DNS Server 2
Enter the secondary DNS server address (IPv4)
-
Optional
HTTP Port
Enter the HTTP port number
80
Required
Modbus TCP Port
Enter the Modbus TCP port number
502
Required
Save new changes
Click
SAVE
to save new changes, a pop-up message opens for users to restart the module
now or later.
Restart Now
: restart the modules immediately to take the changes in effect
Restart Later
: restart the modules later
1
2
3
