Copyright © 2014 ICP DAS Co., Ltd. All Rights Reserved.
∗
E-mail: [email protected] - 53 -
2. Upgrade Firmware using the MiniOS7
The firmware update requires a TCP/IP connection. Connect the MDC-700 to a network
whenever possible.
Step 1
: Use an Ethernet cable to connect the MDC-700 to the computer
After plugging the Ethernet cable, the Link/Act and 10/100 indicator LEDs come on or
start flashing to indicate a connection was made.
Step 2:
Establishing a connection between the MiniOS7 Utility and the MDC-700
Launch the MiniOS7 Utility and then select
New Connection
on the Connection menu.
On the “
Connection
” tab of the “Connection” dialog, select “
TCP
” from the dropdown list,
type the IP address of MDC-700, and then click OK button.
1
