background image

 

M‐7060  4‐channel DI and 4‐channel Relay Output DAQ Module

‐ QuickStart (Mar/2019)  

ICP DAS USA, Inc.

 | 

www.icpdas-usa.com

 | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717

 

 

M-7060  

4-channel Digital Input and 4-channel Relay 

Output Data Acquisition Module

 

Quick Start Guide 

Product Website:  

https://www.icpdas-usa.com/m_7060_m_7060d

  

http://www.icpdas-usa.com/dcon_utility_pro.html

  

1. Introduction 

 

The 7060 series provides 4 digital input channels, 2 Form A and 2 Form C signal relay output 
channels, while the M-7060P provides 4 digital input channels, 2 Form A and 2 Form C power 
relay output channels. All digital input channels can be used as 16-bit counters. In addition, the 
digital input channels can be selected either as sink- or source-type via wire connections. The 
“D” versions of the 7060 series provide eight LED indicators that can be used to monitor the 
status of the digital input and relay output. The “M” versions of the 7060 series support both the 
Modbus RTU and DCON protocols, which can be configured via software. There are also 
options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-
module isolation are also provided to enhance noise protection capabilities in industrial 
environments. The 7060 series is the ideal solution for small signal switching applications, while 
the M-7060P is the perfect solution for high power applications. 
 

2. Terminal Assignment 

 

 
 

Summary of Contents for M-7060








Reviews: