ICP DAS USA ISaGRAF WinCE ViewPAC, User Manual

Page: 149 / 192

ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
10-1
Chapter 10 C# .NET 2008 Program Access To ISaGRAF
Variables
Important Notice:
Please store your application programs and data files in the \Micro_SD . Don't store them in the
\System_disk.
That is because the \System_Disk is using Nor Flash memory. Its size is small and major
purpose is for storing OS, ISaGRAF driver, some basic utilities and DLL . The Nor Flash memory is not
good for frequently updating files. If update files frequently in the \System_Disk (for example, update a
file every 1 to 5 seconds, then it will be about ten thousand more updates in one day), the data or files
in the \System_disk may crush or lost for some days or months later.
This chapter lists the procedure for creating the first demo program by Visual Studio .NET 2008
development tool. There is some sample programs in the ISaGRAF WinCE ViewPAC CD-ROM
ISaGRAF WinCE ViewPAC CD-ROM : \napdos\isagraf\vp-25w7-23w7\CSharp.net-2008-demo\
wp_CSharp01 : Digital I/O demo with one I-87055W in slot 0 of the ViewPAC.
wp_CSharp02 : Analog I/O demo with one I-87024W in slot 1 and one I-8017HW in slot 2.
wp_CSharp03 : Read / Write ISaGRAF internal integers, timers and real variables. (No I/O)
The related ISaGRAF demo project name are "wp_vb01.pia" , "wp_vb02.pia” and "wp_vb03.pia" in the
same directory.
10.1 Create a New Project
1. In the first, users need to open Microsoft Visual Studio .NET 2008 software. And then in the menu of
“ File ”, please run the “ New Project ” .