ICP DAS USA IR-712A User Manual Download

Page: 4 / 47

IR-712A User Manual

Version 1.9

Page

：

Important Information

Warranty

All products manufactured by ICP DAS are under warranty regarding

defective materials for a period of one year, beginning from the date of

delivery to the original purchaser.

Warning

ICP DAS assumes no liability for any damage resulting from the use of this

product.ICP DAS reserves the right to change this manual at any time

without notice. The information furnished by ICP DAS is believed to be

accurate and reliable. However, no responsibility is assumed by ICP DAS

for its use, not for any infringements of patents or other rights of third parties

resulting from its use.

Copyright

Trademark

Names are used for identification purpose only and may be registered

trademarks of their respective companies.

Contact us

If you encounter any problems while operating this device, feel free to contact us

via mail at: [email protected] . We guarantee to respond within 2 working days.

Summary of Contents for IR-712A














































Search results

Summary of Contents for IR-712A

Reviews:

Related manuals for IR-712A

Brands by name

Popular brands

ICP DAS USA IR-712A, User Manual

Search results

Summary of Contents for IR-712A

Reviews:

Related manuals for IR-712A

Brands by name

Popular brands