I-87004W User Manual, v 1.0.1, Aug 2017 E-mail: [email protected]
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
12
Chapter 2. Quick start
I-87004W is a digital temperature sensor module that supports the
DCON protocol. The host needs to use some DCON commands
to configure and communicate with the I-87004W. ICP DAS
provides the DCON Utility Pro program that can configure and test
I-87004W without understanding any DCON command. Users can
follow below steps to configure I-87004W and read temperature
readings from I-87004W.
Step 1: Install DCON Utility Pro on the host.
Note: DCON Utility pro supports I-87004W for version 2.0.0.7 and
later.
ICP DAS provides different versions of DCON Utility Pro for
different platforms that can be used to configure and test I/O
modules. The installation file locations for different platforms are as
follows:
