I-7567 USB/HART
Converter User’s Manual (Ver 1.3, 2015/10/30) ------------- 40
Figure 4-16
:
ModCfg Item
The following is the function
description of “ModCfg”.
1. “For All” Option : (Like Figure 4-17)
Note : It is used for all HART Converter modules
Figure 4-17
:
“For All” Option - Configuration Screen
(1) “Get Module FW Version”:
=> Return the firmware version of HART converter module.
(2) “Reset Module”:
=> Reset HART converter module.
(3) “Get HART Send/Recv Count”:
=> Return the total count of the sending and receiving HART
messages in HART converter module.
(4) “Reset HART Send/Recv Count”:
=> Reset the total count of the sending and receiving HART messages
in HART converter module.
2. “For I-7570” Option : (Like Figure 4-18)
Note : It is just used to I-7570 module and make sure the I-7570
must run in
”Config Mode” first.
