I-7530 RS-232/CAN Converter User’s Manual (Version 2.5, Mar/2012) ------------- 35
4.9 RA[CHK]<CR>
Description:
Reboot the I-7530 module. If the module is displaying on but
the CAN bus is off, users can use this command to reboot the module in
order to allow it to work in order again.
¾
Syntax: RA[CHK]<CR>
RA
Command character
¾
Response:
Valid command will reboot the I-7530 module.
Invalid command: ?<Error Code><CR>
¾
Note:
It is necessary to enable the “Error Response” function in the I-
7530 Utility, in order to receive Syntax and/or communication error
information at the host PC.
¾
Example:
Command: RA<CR>
The I-7530 module will reboot after it had received this command.
4.10 General Error code for all command
Table 11: Error code table
AsciiToHex(Error code)
Description
1
The head character of the command string is invalid.
2
The length of the command string is invalid.
3
The checksum of the command string is invalid.
4 Reserved
5
The RS-232 receiver is timeout.
