ICP DAS USA I-7188XB Series, User Manual

Page: 38 / 152

3.3.4 Build and Execute the Program
Step 1: Open the MS-DOS command prompt window in the same way
as you did in step 3 of the Install Turbo C++ version 1.01
instructions.
NOTE: You must close the original MS-DOS command prompt window
first.
Step 2: Type “d:” and then press <
Enter > to enter D drive letter.
Step 3: Type “cd 7188XB_test” and press < Enter >.
NOTE: Assume there is a folder,7188XB_test, built under d:\. There is a
7188xb.h and 7188xbl.lib in the 7188XB_test folder.
Step 4: Type
tc and press < ENTER > to run the TC++ 1.01 Integrated
Environment. This command can be executed from any location.
I-7188XB Series User’s Manual(Ver.1.0, Apr/2007, 7MH-020-10 ) ---
38