M-7084 User Manual, Rev. A1.3 7PH-013-A13
129
A.4 Node Information Area
Each I-7000 and M-7000 module has a built-in EEPROM to
store configuration information such as module address, type
code, Baud Rate, etc. One minor drawback is that there are
no visual indications of the configuration of the module. New
I-7000 and M-7000 modules include node information areas
that are protected by a cover, as shown below, and can be
used to make a written record of the node information, such
as module address, Baud Rate, etc. To access the node
information areas, first slide the covers outward, as shown in
the figure below.
