Ethernet and Modbus RTU
1.
On the Diagnostic window, users can modify the Ethernet and
Modbus RTU parameters with “Scanner Settings”.
2.
Ethernet Configurations: “Static IP Address”, “Subnet Mask”
and “Default Gateway”. The default Ethernet settings are
shown below.
Item
Settings (Init Mode)
IP
192.168.255.1
Gateway
192.168.0.1
Mask
255.255.0.0
3.
Modbus RTU Configurations: “Net ID”, “Baud Rate”, “Data
Bits”, “Stop Bits” and “Parity”
，
The default Modbus settings
are shown below.
4.
Click “Submit” to finish the configurations.
Item
Settings (Init Mode)
Net ID
1
Baud Rate
115200
Data Bits
8
Stop Bits
1
Parity
None
GW-7473 Configurations
4
GW-7473 Quick Start
