![background image](http://html1.mh-extra.com/html/icp-das-usa/fsm-510g-series/fsm-510g-series_cli-command-reference-manual_3537043033.webp)
Commands Descriptions
33
3.3.53 flow-control {enable|disble}
Description
Enable/Disable flow-control.
Syntax
flow-control {enable|disble}
Parameter
Name
Description
enable
Enable flow-control.
disable
Disable flow-control.
3.3.54 speed
Description
Configure gigabit Ethernet speed and Copper/SFP for gigabit port 7~8.
(port1~6 Only support copper, no SFP)
(port 9, 10 only support auto)
Syntax
speed
{auto|full-l000mbps|full-100mbps|full-10mbps|half-100mbps|half-10mb
ps}
Parameter
Name
Description
auto
Auto negotiation.
full-l000mbps
Set 1000Mbps full duplexing.
full-100mbps
Set 100Mbps full duplexing.
full-10mbps
Set 10Mbps full duplexing.
half-100mbps
Set 100Mbps half duplexing.
half-10mbps
Set 10Mbps half duplexing.
3.3.55 port {enable/disable}
Description
Set interface gigabit port enable or disable.
Syntax
port {enable/disable}
Parameter
Name
Description
disable
Turn off gigabit port.
enable
Turn off gigabit port.
3.4 VLAN Mode Commands
3.4.1 vlan
Description
VLAN commands
Syntax
vlan <vlan_list>
Parameter
Name
Description
vlan_lis
ISL VLAN IDs 1~4095
3.4.2 vlan ethertype s-custom-port
Description
Vlan Ether type for custom S-ports configuration
Syntax
vlan ethertype s-custom-port <0x0600-0xffff>
Parameter
Name
Description
0x0600-0xffff
Ethertype (Range: 0x0600-0xffff)
3.4.3 vlan protocol
Description
Syntax
vlan protocol { { eth2 { <0x600-0xffff> | arp | ip | ipx | at } } | { snap