Technical support:
ECAT-2012H Quick Start
v1.0, Oct. 2019
What’s in the box?
1
Connecting the Power and Host PC
Switch on module and connect it to an EtherCAT network
NOTE:
Attaching an ESC directly to an office network will result in network
flooding, since the ESC will reflect any frame – especially broadcast frames –
back into the network (broadcast storm).
Verify that LEDs indicator
The package includes the following items:
ECAT-2012H Module x 1
Quick Start x1 (This Document)
1)
Connect the Host device to the
IN
port on ECAT-2012H module.
2)
Connect the
PWR+
pin to positive
terminal on a
+10 - +30 V
DC
power
supply, and connect the
GND-
pin to
the negative terminal.
Red, OK
Green, OK
IN
OUT
IN
+Vs
GND
F.G.
