DL-100T485 Quick Start V.104
DL-100T485 Utility Illustration
1. After lunching the Utility, the program interface would be
displayed, as shown below:
Clicking “File” or the
icon opens a previous
DL-100T485 log data file stored on your PC.
Clicking “Connection->Connect->RS-232/RS-485” or the
icon creates a connection from the serial port.
Clicking “Connection->Disconnect” or the
icon
disconnects the connection between the PC and the
DL-100T485.
Clicking
*
“Functions->Get Records” or the
icon
retrieves the log data which is stored in the DL-100T485.
Clicking
*
“Functions->Configuration” or the
icon
configures the DL-100T485.
Clicking “Exit” or the
icon closes the Utility software.
*
This function is only valid when the connection between the
PC and the DL-100T485 has been successfully established.