manualshive.com logo in svg

ICP DAS USA ALX-9000 Series, User Manual, Page: 56 / 83

Share
Download
ICP DAS USA ALX-9000 Series User Manual Download Page 56

ALX-9000 (Linux based PAC) User Manual                                      version 1.0.0                                Page: 56   

Copyright ©  2024 ICP DAS Co., Ltd. All Rights Reserved.                                    E-mail: [email protected] 

3.1.13. 

 

Linux Command “ifconfig” 

ifconfig: show the ip and network mask (like ipconfig in DOS) 

 

 

root@icpdas:/tmp#

 

ifconfig

 

eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>    mtu 1500 
                inet 192.168.2.186    netmask 255.255.255.0    broadcast 192.168.2.255 

                inet6 fe80::290:fbff:fe74:dad3    prefixlen 64    scopeid 0x20<link> 

                ether 00:90:fb:74:da:d3    txqueuelen 1000    (Ethernet) 

                RX packets 14609    bytes 1430664 (1.4 MB) 

                RX errors 0    dropped 1756    overruns 0    frame 0 

                TX packets 702    bytes 104533 (104.5 KB) 

                TX errors 0    dropped 0 overruns 0    carrier 0    collisions 0 

                device memory 0x91180000-911fffff 

 

eth1: flags=4099<UP,BROADCAST,MULTICAST>    mtu 1500 

                ether 00:0d:e0:6e:30:1e    txqueuelen 1000    (Ethernet) 

                RX packets 0    bytes 0 (0.0 B) 

                RX errors 0    dropped 0    overruns 0    frame 0 

                TX packets 0    bytes 0 (0.0 B) 

                TX errors 0    dropped 0 overruns 0    carrier 0    collisions 0 

                device memory 0x91500000-9157ffff 

 

lo: flags=73<UP,LOOPBACK,RUNNING>    mtu 65536 

                inet 127.0.0.1    netmask 255.0.0.0 

                inet6 ::1    prefixlen 128    scopeid 0x10<host> 

                loop    txqueuelen 1000    (Local Loopback) 

                RX packets 171    bytes 14078 (14.0 KB) 

                RX errors 0    dropped 0    overruns 0    frame 0 

                TX packets 171    bytes 14078 (14.0 KB) 

                TX errors 0    dropped 0 overruns 0    carrier 0    collisions 0 

root@icpdas:/tmp# 

Summary of Contents for ALX-9000 Series




















































































Reviews:

No comments