Firmware Update via 7188XW.exe (Ver. 1.1/Aug. 2018)
Page:
6
Step 9: Connect both the PDS-700 module and your computer to the same sub
network or the same Ethernet Switch.
Step 10: Install the
VxComm Utility
on your Host PC, and then run the
Utility to search for any PDS-700
module connected to the nework.
Step 11: Configure the correct network settings for the required PDS-700 module.
Please refer to
“Chapter 3-Configuring Network Settings”
in the PDS-700 Quick Start Guide. If the IP address
settings do not work correctly, please refer to
.
