Icos MVS6000, System Manual, Page: 17 / 94

Hardware
MVS6000 System Level Manual/1.0/Dec-2001 2-5
2.1.5 Communication
· PCI pipe communication
·
RS232 communication:
The following baud rates are supported: 110, 300, 600, 1200, 2400, 4800, 9600, 14400,
19200, 38400, 57600, 115200.
Note: 1. ICOS provides the WinCommDll.dll for the communication (see page 5-2). This
driver is available for WinNT4.0 and Win2000 (and can also be used for the ISA
and HS3L communication on MVS3xx and MVS100/200).
2. When no serial communication is used, the baud rate should be set to 0. This
will improve the performance of the system.
2.1.6 Flat Cable Connectors
The connectors at the topside of the board are labeled:
Each connector is explained in detail on the next page.
C1 C2 C3 C4 C5 C6 C7 C8 C9 C10
C11
xilinx
plx
SW2
SW1
JF4
JF3