iCool TurboCool Installation & Operation Manual Download Page 6

Page 6

Product Discription:

Designed Especially For Athlete Recovery Therapy and With Higher Power Efficiency 

Than Any Comparable Product:

iCools have become the most popular and widely used ice bath cooling and heating systems in the world for the 

economic and efficient provision of accurate automatic temperature control for modern ice bath recovery therapy 

for athletes.

Designed and manufactured especially for large ice bath recovery and contrast therapy spas and pools, the 

TurboCool model  provides up to 10,000 watts of cooling (or heating) at the highest power efficiency available. It is 

a high technology twin heat pump in a very compact single package, with 2 compressors and 2 heat exchangers in 
separate circuits controlled by a digital power management system to minimise electricity use. The entire system 
is fully automatic and is controlled and monitored via a modern colour touch screen user interface driving an 
advanced digital controller.

Lowest Running Cost:

Using the latest heat pump technology the TurboCool can produce up to 10,000 watts of water chilling power yet  it 
uses only a maximum of 3000 watts in normal operation to do so. Furthermore, because the TurboCool is actually 
two 5000 watt heat pumps in a single cabinet it can can operate from a normal 15 amp power outlet (220v models), 
by digitally controlling the compressor starting sequences to avoid high startup loads. The built in Intelligent Digital 
Power Management System, DPMS, (exclusive to iCool) means that your TurboCool can operate from a normal 15 
amp power outlet if necessary. (30 Amps @ 110V in North America and Japan). This saves a lot of money on initial 
installation costs, because most other chillers of this power need a special connection to 3 phase power, whereas 
the TurboCool only requires single phase power. 

This is new technology developed by iCool and has many advantages.   

The Intelligent Control System Saves a Lot of Electricity.

Firstly, start up current is much lower because the built in digital control makes sure that the 2 systems never start 
at exactly the same time, so it never exceeds the rating of a normal single phase power socket. 
The second advantage is that the TurboCool can acurately provide the exact amount of cooling power actually 
required to avoid waste. Both of the twin heat pumps run at full power for fast cooling, but at other times such as 
over night and when the spa pool is not in heavy use, it automatically reduces power or even turns one of the heat 
pumps off and that saves a lot of electricity. Only iCool has this power saving feature.

In Heating Mode Running Cost can be up to 65% Lower Than Typical Spa Heaters. 

In  

heating mode (ICTurbo DualTemp model) the Turbo uses as much as 65% less electricity compared to a normal 
electric element spa water heater, because it uses modern reverse cycle heat pump technology. It does not use 
wasteful electric elements. So with power saving features in both cooling and heating modes the owner can save 
a lot of money each year on electricity costs. 

Standard Package Includes:

A Full Colour Touch Screen to control and monitor all functions.
(On request the touch screen can also display your club logo or graphics.)
Dual Titanium Heat Exchanger Tanks.
Simple industry standard connections for water In and water out.
Twin digitally controlled heat pump cooling systems in a single cabinet. 
Enviromently friendly Eco Refrigeration Gas HR22 “Green Gas”.
Vibration isolation mountings.
Built in earth leak detection safety system.
Area Lighting controlled from the touch screen.

*As optional extra, 

a very convenient Wall Mounted Remote Control Touch Screen Panel is available. 

Summary of Contents for TurboCool



















Reviews: