Users Manual
ICL-FR
68
SERVICING and TROUBLE SHOOTING (Continued)
Check for split pairs. A split pair cable will drop packets even if the cable is only 2 meters long. The incorrect wiring example
shown below represents a split pair.
4.
Re-make the RJ45 connector. A marginal or corroded crimp will cause dropped packets.
5.
&KHFNWKHFDEOHOHQJWK7KH(WKHUQHWVWDQGDUGIRUXQVKLHOGHGWZLVWHGSDLUFRSSHUFDEOHVLVDPD[LPXPPHWHUVIHHW
Copper cables longer than this will not support CobraNet streaming audio.
Symptom: I can communicate with my Iconyx array, but I get errors when writing beams.
1.
This is a classic symptom of network problems. Go to the Network Manager or start CobraNet Discovery and look at the error
count for all devices. Any device that shows errors has a suspect network connection. Review the previous page for
troubleshooting tips..
Symptom: Analog audio sounds like its gating.
1.
You are sending a signal to Analog 1, but some other input is selected on the Connect tab. As an aid to troubleshooting the
Analog 1 input will always pass audio, but if some other input is selected, Analog 2 for example, the signal to Analog 1 must
H[FHHGDWKUHVKROGWKLVLVZK\\RXKHDULWJDWLQJ6HOHFW$QDORJDVWKHLQSXWDQGWKHJDWLQJZLOOVWRS
6\PSWRP0\,FRQ\[LVVORZO\ÁDVKLQJWKHEOXHZLQNOLJKW
1.
You have the Ethernet cable plugged into a slave unit. Either move the cable to the master unit or set the unit with the cable to
be the master.
Symptom: My IC-Live Dual shows up as only a single IC Live module.
1.
,VWKHZLQNOLJKWÀDVKLQJVORZO\",IVR\RXKDYHWKH(WKHUQHWFDEOHSOXJJHGLQWRDVODYHPRGXOH(LWKHUPRYHWKHFDEOHWRWKH
master module or reset the DIP switches.
2.
&KHFNWKH',3VZLWFKHVWKHUHPXVWEHRQO\RQHPDVWHUDQGWKHVODYHVPXVWEHLQGLYLGXDOO\LGHQWL¿HGDVVODYHPRGXOHV
'LG\RXLQVWDOOWKHLQWHUFRQQHFWFDEOHVEHWZHHQWKHWZRPRGXOHV",IQRW\RXPXVWGRWKLV
CORRECT WIRING
3LQV SDLU
3LQV SDLU
3LQV SDLU
3LQV SDLU
INCORRECT WIRING (Split Pair)
3LQV SDLU
3LQV SDLU
3LQV SDLU
3LQV SDLU
Summary of Contents for Iconyx IC Live ICL-FR
Page 75: ......